This is a set of springs and washers. Idling screw (product number C030) is sold separately.

Genuine part number: 16012300004 16012300014 This is a set for one vehicle (4 pieces). (This is thinner than the jet needle included in the [C009]CB750 K0-K6/F1 Carburetor Repair Kit .) [E160S] Recommended for engines using 836cc oversized pistons and piston...

Genuine part number: 16012300014 It's one cylinder. *K0 to K2 jet needle sets can also be used for K4. Please adjust the main jet to #120 or above.

One unit.

A spring used to lower the rate of the sub-return spring of a CR carburetor. The throttle force required has been significantly reduced, resulting in a lighter throttle feel. Maximum effect is achieved when used in conjunction with other Factory...

Genuine part number: 93500030100A 9411103000

Genuine part number: 991142461000 It's one cylinder.

Genuine part number: 16011341004 It's one cylinder.

One unit.

Cannot be used on vehicles with a single carburetor.

One unit.

By making the needle jet into this shape, It has been designed to atomize more efficiently. It has the effect of reducing smoldering when tuning or slightly open. *Setting is required. "We recommend adjusting the main jet to 120 or...

Caliber φ32 Carburetor pitch 77-80-77 Spigot outer diameter (mm) 37mm Spigot overall length (mm) 30mm <Recommended parts>・[Y001] Racing Hand-Bent Straight Cyclone ・[Y003] Machined camshaft "DAYTONA CAM2"・[E160S] Φ65 Piston KIT・[E375] Uotani SP2 Full Power Kit 1. Please use an accelerator cable...

This carburetor is compatible with the late K0 model through to the K6 model. It is an overhauled carburetor with hoses and is synchronized. Just install it and you're ready to ride (you may need to adjust and tune it...

Made by BITO. Please use an accelerator cable that is 5cm longer than usual. *The original air cleaner case cannot be used. ■ Separate parts [T247] CB750K K&N Air Cleaner Power Filter 51Φ [T158] CB750K Fuel Tube (with clip) ■...

Genuine part number: 16014300004 Yamiyaya reproduction parts. Made of brass. Made in Japan.

It's one cylinder. Depending on individual differences, it may be necessary to modify the actual product.

CR carburetors share one body size with multiple bore sizes. As a result, the largest diameter within the body size (CR33 for small bodies, CR39 for big bodies) has the lowest throttle link ratio when the throttle link ratio is...

Mounting hole inner diameter: 42mm